A vinyl fence is built from PVC panels, posts, and rails that slide or lock together. It comes in solid privacy styles, open picket styles, and everything in between, and it gives you the look of a finished fence without staining or painting it. This page covers what vinyl costs around Baton Rouge, the choices inside it, and what to ask before you sign.
What a vinyl fence costs
Published ranges for installed vinyl fencing in the Baton Rouge area run $20 to $43 per linear foot. Those are published ranges, not quotes, and the figures behind them are not new — treat them as a reference point. Multiplied out, that is about $2,000 to $4,300 for 100 feet and $3,000 to $6,450 for 150 feet, before gates and removal of an old fence.
The low end is a shorter fence in a simple style and a standard color. The high end is a tall privacy fence, a decorative top, a non-standard color, or a line with slopes and obstacles. The fence cost guide compares vinyl with wood, chain link, and aluminum at the same length.
Where vinyl makes sense
Vinyl is a good fit when the fence needs to look finished from day one and you would rather not plan around refinishing it. People most often ask about it for:
- A backyard privacy fence where the alternative is wood.
- A front-yard picket fence that should stay white.
- A pool area or patio where the fence is always in view.
- A long boundary in a ranch-rail style.
It is not the cheapest option. If the budget is tight and privacy is not the point, chain link starts much lower. If privacy is the point and you do not mind refinishing, wood starts lower too.
Styles
- Privacy. Solid panels with no gaps. The vinyl alternative to a wood privacy fence.
- Semi-privacy. Panels with small gaps or a lattice top, so some light and air come through.
- Picket. The classic spaced front-yard fence, usually shorter.
- Ranch rail. Two or three horizontal rails, for marking a boundary or a large lot rather than enclosing it.
If you are between two styles, ask for both on the same quote. The per-foot difference tells you exactly what the upgrade costs.
Height, color, and texture
Height moves the price the most, because taller panels and longer posts cost more. Decide what the fence needs to block, then ask the installer what heights apply where you live. Ask your installer who pulls the permit.
White is the familiar vinyl color. Ask what other colors and textures the installer carries, and what each adds to the price per foot.
Upkeep
Vinyl does not need staining or painting. It still needs washing now and then, and panels can crack if something heavy hits them. Ask the installer what care they recommend and whether replacement panels will be available in your style and color if one is damaged later.
Posts and how it goes together
Vinyl fences are only as straight as their posts. Ask the installer to put these on the quote:
- How the posts are set in the ground, and how deep.
- Whether any posts are reinforced, especially gate posts and corners.
- How the panels lock into the posts and rails.
- How the fence will handle slopes — stepped panels or panels cut to follow the ground.
Gates
A vinyl gate needs a solid frame and a well-set post to stay square. Ask how each gate is reinforced, what hinges and latch are included, and whether the gate should close on its own. Drive gates are their own line item. The gates section on the installation page covers widths and hardware.
Before installation day
A few practical questions make the day go smoothly. Ask how long the job should take, whether underground utility lines will be marked before anyone digs, and what happens to the old fence and the soil from the post holes. If you have a dog, ask when the yard will be secure again. And ask how the final walkthrough works — that is the moment to point out a panel that sits crooked or a gate that does not latch cleanly, while the installer is still there.
Vinyl or wood?
Published ranges put vinyl at $20 to $43 per linear foot and wood privacy at $15 to $30 per linear foot. Wood starts lower; vinyl skips staining and painting. For a privacy fence on the same footage, ask for both — the gap between the two quotes, against the upkeep you would rather skip, usually settles it.
Repairs to a vinyl fence
Vinyl is usually repaired by replacing parts rather than patching them: a cracked panel, a popped-out picket, a bent rail, or a post cap that has come loose. The catch is matching — styles and colors change, and a new panel next to an older one can look different. When you call about a repair, say what style and color the fence is and, if you know it, who installed it. That helps the installer find parts that match.
What the quote should list
- 1Footage & layoutTotal linear feet, fence height, and where the line runs — drawn or described so you can check it.
- 2Old-fence removal & haul-offTaking down and hauling away the existing fence, priced on its own line — or stated as not included.
- 3Materials & postsFence material and style, post type and spacing, and how posts are set.
- 4Gates & hardwareEach gate's width and type, plus hinges, latches, and any hardware upgrades.
On the materials line, look for the style, height, color, and how the posts are set and reinforced. If two vinyl quotes are far apart, the panel style and post reinforcement are usually why.
Getting a quote
Call (225) 351-2857 or send the form with your rough footage, the style and color you have in mind, how many gates, and whether an old fence needs to come out. Your request goes to one local installer, who measures and puts the quote in writing. The quote, the contract, and the work are between you and that installer. Repairing an existing vinyl fence instead? See fence repair.